-->

Solution to solve the problem Pull out the Paper on the Bizhub 350 copier

Solution to solve the problem Pull out the Paper on the Bizhub 350 copier - On this occasion, copytechno.com would like to share tips on how to overcome it a classic problem that often occurs on the Minolta 350 copier [full paper] which causes paper jams and will not rise. I have used the Minolta Bizhub 350 type machine and always full of paper restrictions. investigated to investigate this problem due to several factors. starting from playing heavy motorbikes, [pickup] paper is smooth and also the [gear box] part is dirty and needs cleaning.

If some of the parts that have been copytechno.com write above have been cleared, but the problem [Full Out Paper] is still the same, try changing the parts of the dynamo that is already heavy. or better dismantle the whole machine then clean and give lubricant to the part that is about the heavy rotation.

Solution to solve the problem Pull out the Paper on the Bizhub 350 copier
Solution to solve the problem Pull out the Paper on the Bizhub 350 copier
Correcting the problem [full out paper] on the Bizhub 350 machine is indeed fairly easy, you have to be careful and observant in handling it because sometimes when it's finished unloading and cleaning the machine is normally smooth, after 3 to 5 days the machine returns full out paper. well in this case what you should suspect is about toner leakage from developing, so that the toner sprinkles make heavy gear to spin.

Read Also :

How do you have to check the mica plastic part that is in developing, if you have torn or damaged your friend, replace it with a new one. try not to sprinkle the toner onto the body of the machine. the main parts that must be guarded are [motorbike], [clutch] [takeup], and also drive gear not to get dirty, One of the most dominant causes of the problem [full out paper] is the [Roll Singkron] section which is located at the door side.

Hopefully, this article provides new insights and lessons for you, the conclusion is full out paper usually occurs because of heavy machine pulls. so care is very important to note so that the Bizhub 350 engine is not jammed. if there are additional friends you can comment below.

0 Response to "Solution to solve the problem Pull out the Paper on the Bizhub 350 copier"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel